BOOT RELEASE SOLENOID

Heavy duty solenoid is designed to deliver mechanical action in one direction only. A spring them returns to solenoid to it's rest position.

A flexible cable connection enables the fitter to connect to almost any cable driven boot release wire.

Step by step installation

• With the boot lid open, turn the key and examine the lock action.
• Attach the mechanical linkage to the lever.
• Mount the solenoid in a position to allow the cable to attach to the mechanical linkage with the cable pulled out to maximum length.
• Ensure the solenoid is mounted parallel to the lever.
• Ensure the cable will run freely without rubbing on any surfaces.
• Attach cable to mechanical linkage.
• Remove slack before tightening nut/bolt.
• Connect wiring as per diagram above.