You have selected the REM-004 remote control shown in top image. All compatible remote controls are shown below.

IMPORTANT: Special attention needs to be paid to the revision number located on the remote control printed circuit board. Only remote controls with the "TX-89" revision number can be supplied. If your remote control is labelled TX-94, the alarm system must be re-programmed to accept the "TX-89" remote controls. Contact your nearest CYCLOPS service centre.

As the REM-004 is a "fixed" code remote control, clients may have their new remote controls cut to match their existing remote controls. This can be done by your CYCLOPS service centre, or by the client if the client has a soldering iron. See below for details.

Selected:	Your system can accept other TX-89's.	Please call Cyclops Service centre to organise re-programming.
REM-004** View remotes See full specs Buy online
Compatible with:	When order a new REM-004 (TX-89) please supply your original code settings. Examine the bottom side of the REM-004 printed circuit board to find a group of solder joints. All joints are formed between the circular pads and one of either the High (H) or Low (L) pads. Some circular pads will have no connection. An example of a code is 1H, 2H, 3L, 5H. Circular pads #1, #2 & #5 are connected to High pads. Pad #3 is connected to a Low pad. All other pads are not connected.
REM-004** View remotes See full specs Buy online

Back to full list of compatible remote controls.