PARALYSER 455 - FACTORY IMMOBILISER UPGRADE PARALYSER 455 - FACTORY IMMOBILISER UPGRADE
Upgrade alarm system, which enhances a remote immobiliser or keyless entry system.
 | Upgrades practically any keyless entry system into a full alarm system. |
| Uses vehicles OEM supplied remote controls. |
| Manufacturers and models include |
| Bright red flashing LED warning light. |
| | Arm/Disarm confirmation siren/horn beeps (programmable cancel) |
| Arm/Disarm confirmation flashes (programmable cancel or reversed) |
| User retrievable diagnostics - reports the last three triggers in reverse order. |
| Automatic fault isolation - should a zone become defective, the P455 will isolate and ignore the circuit responsible. |
| Output to drive either horn relay or siren (programmable pulsed or constant) |
| Two circuits of built in immobilisation (optionally connected) |
| | Independent inputs for doors and bonnet and or boot |
| False alarm free glass breakage detector |
| | Plug in Ultrasonic, microwave or shock sensor detectors. |
| | Voltage drop (aka millivolt) sensing (installer selectable) |
| | Intelligent siren reset timer- meets Australian Standards AS/NZS 3749.1-1997:1997 & AS/NZS 3749.1-1997:2003 |
| | Operating voltage +9VDC - +18VDC. |
| | Operating current armed < 15 mA. |
| | Load dump protected (70 Joules) |
| | Operating ambient temperature - 300 C to + 50 C |
| | Operating field strength environment -Up to 50 V/M (1 MHz to 1000 MHz) |
| | Requires basically only 3 connections for the identification of arm/disarm. |
