GBS-4XR
AUDIO GLASS BREAKAGE SENSOR
Audio glass protection for all vehicles with hard-top and windup windows. Sensor is not prone to false alarm due to vibration
- Proudly Australian
Designed and engineered in Perth, Western Australia
- Audio Intrusion Detection
Built-in amplifiers filter and amplify the noises inside the cabin of vehicle. When the high frequencies associated with breaking glass are detected, as trigger signal is sent to the alarm system
- Active Microwave Protection Field
Built-in electret microphone picks up all sound from inside the vehicle, filtering everything except the high frequencies associated with smashing glass. Triggers if the noise exceeds the set level
- Temperature compensative circuitry
Ensures sensitivity does not change as ambient temperature rises or falls
- Sensitivity adjustment
Sensor allows installer to adjust sensitivity to provide compatibility with different size vehicles
- Trigger status indicator
LED indicator shows when sensor is triggered (dual stage/zone sensors include one colour for each trigger)
- Super low current draw
1.3mA when idle, 11mA when triggered for 2 seconds
- Wide Operating voltage
Operating voltage +9VDC to +15VDC
- Operating temperature
-20 degrees to +85 degrees for equipment designed to be installed within vehicle cabin
- Trigger output rating
Each output of the sensor can sink 300mA, suitable for energising relay coil when necessary
- Power Consumption
Each additional sensor added to a system will increase it's over-all power consumption from the car battery. See the list of each sensor's power consumption.
- Compatible with Cyclops remote control systems
Cyclops range of immobilisers/alarms : P355, P375, P375B, P385, P455, P485,P755, P775, P775B, P785, KE-CLR-TX90, KE-CLR-TX11, S35i, S35B, S35C, S75i, S75B, S455, S485 and S75C
- Cannot drive relay as standard
No back EMF protection on the trigger output, installer must add external protection
- No reverse polarity protection
This sensor was designed to be used exclusively with the P355-785 & S35i-S75C alarms/immobilisers, these modules provide reverse polarity protection. Installer must add protection if install in non-conventional way
- Installation Guide
Generic instructions on how to fit the sensors with blue plug and how they work. Open Installation Guide.
- Manufacturers warranty
Guarantees product is free from manufacturing defects for 12 months from time of purchase 
- Manufactured in ISO9001 facility
Built within world standard production facility
- Volumetric protection sensors
Tested to and passed AS3749 section 3.4
Legend:
Will categorically need extra hardware and connections.
May require additional hardware or connections.
Additional relay and connection required in vehicles with boot solenoid. Relay and solenoid kit required for vehicle without solenoid.
Vehicle circuit polarity may require addition components to convert voltage.
Special order required - this is not part of the standard hardware.
Special feature out of Dynamco's control.
Conditions apply.
Programmable option.
Due to model and manufacturer variations, specifications of actual product may differ from those shown.
Conditions apply.
Programmable option.
** Product images are for illustration purposes only. Actual appearance may vary slightly without notice.
Product Catalogue