REM-021
SECURITY SYSTEM CONTROLLER
- RF Transmission Frequency
304MHz pulse width modulated (adjustable)
- Standard code transmission
Each remote control is programmed with only one of several billion billion code combinations. No code is ever programmed into more than one remote control.
- Battery type
23a, 12 volt, alkaline
- High Intensity LED
Red high intensity 3mm LED
- Remote battery life
The 23a 12 volt 38mAH alkaline battery has a expected average life span of between 9 and 18 months (depending on usage). Battery manufacturer may vary due to availability of stock. See the GP battery manufacturer website.
- Printed Circuit Board Marking
R17-PT
- Switch Type
This remote control uses 2 x double pole, double throw, SMT switches. Each switch has 4 pads
- Uses SWI-008 two pin switch
Two single pole single, throw normally, open contacts, which all become common when switch is pressed. Four pins per switch See switch.
- Compatible with Cyclops remote control systems
Cyclops alarm/immobilisers S661 and 
661.
- Compatible with these remote controls
Many remote controls have the same encoder and transmission frequency. View all compatible remote controls.
- Programming Instructions
Details the programming procedure for installing new remote controls into a alarm/immobiliser memory. Also includes a list of possible problems if the procedure fails. Click to open Programming Instructions.
- Instructional Videos
Short instructional videos, one of which describes to clients how to successfully program their new remote control into their alarm . Click here.
- Spare Remotes
Replacement remote controls, touchkeys and other spares are available direct from Dynamco. Credit card, cheque and money order payments are very welcome at the Cyclops online store.
- Replacement Case
Replacement cases for this remote control can be found on this page of our Cyclops online store.
Legend:
Will categorically need extra hardware and connections.
May require additional hardware or connections.
Additional relay and connection required in vehicles with boot solenoid. Relay and solenoid kit required for vehicle without solenoid.
Vehicle circuit polarity may require addition components to convert voltage.
Special order required - this is not part of the standard hardware.
Special feature out of Dynamco's control.
Conditions apply.
Programmable option.
Due to model and manufacturer variations, specifications of actual product may differ from those shown.
Conditions apply.
Programmable option.
** Product images are for illustration purposes only. Actual appearance may vary slightly without notice.
Product Catalogue