SEN-002
SINGLE STAGE SHOCK SENSOR
Single stage shock sensor is the simplest way to detect physical impact against the car. Once the vibration level exceeds the set value, the alarm trigger signal is sent
- Electro-Mechanical activation
Sensor detects any vibration exerted upon the vehicle. An intruder is detected when the vibration exceeds the set level
- Vibration Protection
Shock sensors will protect glass. Intruder attempting to interfere with either items will exert vibration upon the vehicle
- Temperature compensative circuitry
Ensures sensitivity does not change as ambient temperature rises or falls
- Sensitivity adjustment
Sensor allows installer to adjust sensitivity to provide compatibility with different size vehicles
- Trigger status indicator
LED indicator shows when sensor is triggered (dual stage/zone sensors include one colour for each trigger)
- Super low current draw
1.3mA when idle, 13mA when triggered for 2 seconds
- Wide Operating voltage
Operating voltage +9VDC to +15VDC
- Operating temperature
-20 degrees to +85 degrees for equipment designed to be installed within vehicle cabin
- Polarity protection
The system circuitry is design to protect itself against accidental battery polarity reversal. This can happen when replacing the vehicle battery
- Trigger output rating
Each output of the sensor can sink 300mA, suitable for energising relay coil when necessary
- Trigger output is back EMF protected
Clamping diode protects the output driver transistor(s) to stop damage from the super high voltages that occur when a relay coil is released
- Power Consumption
Each additional sensor added to a system will increase it's over-all power consumption from the car battery. See the list of each sensor's power consumption.
- Compatible with Cyclops remote control systems
Cyclops range of immobilisers/alarms : P355, P375, P375B, P385, P455, P485,P755, P775, P775B, P785, KE-CLR-TX90, KE-CLR-TX11, S35i, S35B, S35C, S75i, S75B, S455, S485 and S75C
- All vibration is assessed
False alarms are possible if sensitivity is too high, cats jumping on bonnet or passing traffic could trigger sensor. Adjust when necessary, or else look at SEN-006, Dual zone fuzzy logic sensor.
- Installation Guide
Generic instructions on how to fit the sensors and how they work. Open Installation Guide.
- Manufacturers warranty
Guarantees product is free from manufacturing defects for 12 months from time of purchase 
- Manufactured in ISO9001 facility
Built within world standard production facility
Legend:
Will categorically need extra hardware and connections.
May require additional hardware or connections.
Additional relay and connection required in vehicles with boot solenoid. Relay and solenoid kit required for vehicle without solenoid.
Vehicle circuit polarity may require addition components to convert voltage.
Special order required - this is not part of the standard hardware.
Special feature out of Dynamco's control.
Conditions apply.
Programmable option.
Due to model and manufacturer variations, specifications of actual product may differ from those shown.
Conditions apply.
Programmable option.
** Product images are for illustration purposes only. Actual appearance may vary slightly without notice.
Product Catalogue