Dynamco - Innovative Vehicle Solutions: Products > Sensors

SEN-003

REVERSE PARKING SENSOR

Introduction

This sensor is designed to provide an aid to reverse parking. The driver is made aware of any obstacles behind the vehicle which may not be visible

Operation

Four ultrasonic detector heads
Detector heads may be mounted flush in the bumper or above/below bumper on brackets where clearance behind bumper does not allow for flush mounting

Visual Output

Digital display shows distance to obstacle
LED segment display shows distance to closest obstacle in meters, increasing or decreasing in 0.1m increments. LED's make distance visible especially at night
Obstacle location display
Display also features a three segment bar graph for each side of the car. Left and right bar graphs light according to which side the obstacle is located. If right bar is at maximum due to obstacle at close range, the left bar code will still display measurements for obstacles further away on left hand side (and vice-versa)

Audio Output

Piezo buzzer warning
Display module emits beeps as vehicle approaches obstacle. The beeps become more frantic as the distance to the obstacle gets smaller

Specifications

Wide Operating voltage
Operating voltage +9VDC to +15VDC
Accuracy and coverage
Systems are supplied in four head configuration to provide high accuracy and wider coverage
Measurements
Sensors will pickup obstacles between 0.3 to 2.0 metres in 0.1 metre increments
Power Consumption
Each additional sensor added to a system will increase it's over-all power consumption from the car battery. See the list of each sensor's power consumption.

Compatibility

System compatibility issues
There are three versions of the reversing system that have been sold in Australia. The easiest method for identification of your system is on this page.

Printed Material

Installation Guide
Generic instructions on how to fit the sensors and how they work. Open Installation Guide.
User Guide
Informs the end-user of the system's functions, features and limitations. Open - User guide.

Warranty

Manufacturers warranty
Guarantees product is free from manufacturing defects for 12 months from time of purchase

Legend:

   Will categorically need extra hardware and connections.
   May require additional hardware or connections.
   Additional relay and connection required in vehicles with boot solenoid. Relay and solenoid kit required for vehicle without solenoid.
   Vehicle circuit polarity may require addition components to convert voltage.
   Special order required - this is not part of the standard hardware.
   Special feature out of Dynamco's control.
   Conditions apply.
   Programmable option.
   Due to model and manufacturer variations, specifications of actual product may differ from those shown.
   Conditions apply.
   Programmable option.

** Product images are for illustration purposes only. Actual appearance may vary slightly without notice.