Flash menu not displaying: please upgrade your Flash Player.

SEN-009

Contents of kit

Introduction

• Angular Protection
  This sensor has been developed to detect a change in angle of the a vehicle and the vibration impacting upon the vehicle

Operation

• Environment adjustment
  If vehicle is buffeted by strong gust of wind, the sensor allows the vehicle time to return to the original angle
• Adjustable sensitivity
  Allows installer/user to adjust the two sections of the sensor independently

Wiring

• Plug and play for service
  Designed to allow easy access for service technicians. Plugs and sockets are located inside the main control module to protect against access by thieves

Visual Output

• Trigger status indicator
  LED indicator shows when sensor is triggered

Specifications

• Super low current draw
  3mA when idle, 6mA when triggered for 1 second
• Wide Operating voltage
  Operating voltage +9VDC to +15VDC
• Operating temperature
  -20 degrees to +85 degrees for equipment designed to be installed within vehicle cabin
• Polarity protection
  The system circuitry is design to protect itself against accidental battery polarity reversal. This can happen when replacing the vehicle battery
• Trigger output rating
  Each output of the sensor can sink 300mA, suitable for energising relay coil when necessary
• Trigger output is back EMF protected
  Clamping diode protects the output driver transistor(s) to stop damage from the super high voltages that occur when a relay coil is released


• Maximum range angle of deviation
  50 degrees on any axis
• Minimum detectable angle
  2 degrees on any axis

Printed Material

• Installation Guide
  Complete installation guide and specifications for the SEN-009.
• User Guide
  Informs the end-user of the system's functions, features and limitations. Open - User guide.