Flash menu not displaying: please upgrade your Flash Player.

SIR-009

Contents of kit

Introduction

Siren with 170mA/hr battery backup, with soft-tone for arm/disarm

• Battery Backup Protection
  The siren will continue to sound if a thief removes the vehicle's battery leads. Internally the siren switches to it's own battery for it's source of power

Operation

• Power supply
  Sources constant power from vehicle's battery
• Trigger wire
  Trigger wire is grounded by alarm system to make sound
• Soft-tone Arm/Disarm confirmation
  Arm/disarm chirp is a soft-tone signal, where as full trigger is standard siren sound
• Enable/Disable switch
  Key operated lock and switch with dust cap to turn off siren when taken the vehicle for a service
• Automatic Battery Charging
  The siren will automatically recharge it's battery from the vehicle battery

Specifications

• Sound Frequency bandwidth
  1500Hz to 3550Hz
• Sound Pressure Level
  No less than 90dB and no greater than 115dB @ 1metre
• Idle Current Draw
  16mA maximum
• Sounding Current Draw
  1000mA maximum
• Wide Operating voltage
  Operating voltage +9VDC to +15VDC
• Battery Backup Capacity
  170mAH maximum
• Battery Backup Charge Rate
  10mA maximum

Convenience Functions

• Wiring
  Dummy wire which may be used to confuse a thief, or to route the bonnet switch signal through the firewall back to the alarm

Printed Material

• Installation Guide
  Complete installation guide and specifications for the SIR-001 & SIR-009.

Standards Compliance

• Australian Standards Compliant
  Tested to and passed all relevant sections, including heat, moisture, vibration, sound pressure level of AS3749.1